The Most Common Mistakes People Make With Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. They do not rot or rust like aluminum and timber.

Regularly cleaning and lubricating upvc window repairs [try Ivimall] windows and doors is vital. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, which can make it very hazardous and possibly fatal. You should take the time to ensure that your windows are in good shape.

For single pane windows it can be relatively simple to replace them, and the replacement will usually fit inside the frame that was previously installed easily. However, if windows with double panes are secured by internal beading, it will be more difficult to take out the old panes and put in new ones. In this situation, you will need to source some plastic spacers to aid the new pane in being able to fit correctly into the window frame.

If you're planning to try to remove the window panes yourself, it is essential to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also an excellent idea to lay down a drop cloth before you begin working on the glass, so that any shards fall onto the cloth rather than on the floor where they can be trampled upon and cause further damage.

It's a great idea cover the gap with tape after the glass has been removed. This will keep drafts and water from getting into your home until a professional comes out to fix the window. It also acts as a barrier that will prevent any intruders to gain access to your home. If the gap between the window and the door is substantial, you may want to use security screens that has windows. This will provide the best of both.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, over time they may be afflicted by a variety of issues, including sliding. A sagging uPVC windows can cause issues with light, draughts, and even security. It's crucial to act immediately if you discover that your uPVC windows are sliding.

Repositioning the hinges can help fix a window that is sliding. First, you'll need to open the windows so you can get at the frame. Then, remove both the hinges on the top and bottom using a screwdriver, and UPVC window repairs then adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, close the window and check for fitting. If you are happy with the fit of your window, you can tighten screws to secure them in the right position.

If you are unable to reposition the hinges, you could need to replace the seal. Over time rubber seals can lose their elasticity and become dry and cause their tightness to decrease. If this happens, it's important to replace the seal as quickly as possible so that your uPVC windows are watertight and draught-proof.

uPVC handles could also loosen. The majority of the time it is due to screws that have become loose over time. However, it could occur because the handle mechanism has been worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. The first step is to close your window and do an initial test fit. The joint at the corner of the sash must align with the joint on the casing. If it doesn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is crucial to take action if you wake up every morning to find mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature of your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a fairly simple fix and should be undertaken by any DIY expert. Depending on how serious the issue is, the old caulking may need to be removed. When it comes to uPVC repair, you must avoid 'over-caulking'. This can make your window more difficult to clean and reduce its energy efficiency.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious instances, you may need to think about replacing the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and is able to quickly spread throughout the home.

If the leakage occurs between the double-glazed window, it is more likely that the problem is related to the seal, not the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open, or if it opens with the breeze. These are easily replaced by any competent DIYer and can be completed in a matter of minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that are hinged and, like all mechanical parts, they will wear out over time. It's very simple to change a window hinge but it's much simpler if you have someone to help hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. This can be done by looking for the arrows on each hinge, this indicates the direction in which the window should open.

The issue could be caused either by opening the window improperly or by a poor installation at the factory. Sending us a picture via our website will often solve the issue. We are happy to give suggestions.

It is also essential to grease the hinges regularly. Applying an engineering lubricant that is light to the hinges is a good method to accomplish this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It can also reduce the chance of windows sticking and prevent corrosion. Ideally, you should perform this every year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. Firstly the hinges, again due to wear and tear could become misaligned. This causes an opening to appear where the sash meets the frame. These can be easily fixed by giving them a good clean, but when they're beyond repair, it may be necessary to get them re-aligned or replaced. The interlock may be misaligned. This is located on the hinge side and might require to be cleaned. In some cases it might be necessary to replace the hinges.

These seals can wear down or become damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping will help to prevent draughts. Replace the upvc windows with low-emissivity glasses. This will help to regulate indoor temperatures, and reduce the risk of draughts.

Another method of reducing the amount of draughts is to use a draught-excluder. These are typically fabric tubes filled with a filler that can be hung over your window replacement near me sill. These will keep your home warm by blocking out cold air.

Your upvc windows can remain a great source of insulation and security in your home with regular maintenance and repairs. It is crucial to recognise that all windows have a lifespan and they may reach a point where it is more efficient to replace them than fix them. If you are having issues with your upvc windows, it is always recommended to seek assistance from a professional immediately.