15 Gifts For The Repairs To Upvc Windows Lover In Your Life

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they do not corrosion or rot.

It is crucial to wash and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, making it extremely dangerous and possibly fatal. It is important to take the time to make sure that you're doing all you can to keep your windows in good condition.

Single-pane windows are relatively simple to replace and typically fit into old frames very easily. If you have double glazed window repairs-paned windows which are held together by internal beading, it will be more difficult to remove and replace the old panes. In this case, you will need to source some plastic spacers to aid the new pane in being able to fit properly into the window frame.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth before you begin working on the glass, so that any shards will fall on the fabric rather than on the floor where they could be trampled on and cause further damage.

It's a great idea tape the gap once the glass is removed. This will stop drafts and water from entering your property until a professional is able to fix the window. This also serves as a barrier to prevent any intruders from getting into your home. If the gap between the window and the door is substantial, Upvc Window Repair you may want to use security screens that includes a window. This will provide the best of both.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber sash windows. As time passes, they may develop a variety of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. It is crucial to act when you notice your uPVC windows are falling down.

To fix a window that is sagging you can try to reposition the hinges. To do this, you'll have to open the window to access the frame. Then, you can remove the hinges at the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, close your window and test it for fitting. If you're satisfied with the fit of your window, you can tighten screws to secure them in the right position.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, causing them to lose their tightness. If this happens, it's crucial to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and secure from draughts.

uPVC handles can also loosen up. The majority of the time, this is caused by screws that have come loose over time. However, it could also happen because the handle mechanism has been worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need close your window and do a test fit. The corners of the sash must be aligned with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into position.

3. Water Leaks

If you wake up to wet floors and mouldy walls every time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home, and affect your ability to regulate the temperature of your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or not present.

It is a fairly easy fix that can be completed by any DIY expert. Based on the severity of the problem the old caulking may need to be removed before a new layer is applied. It is important to remember that when it is about uPVC window repairs, do avoid the temptation to "over-caulk and then make the area more difficult to clean and can decrease the efficiency of your energy usage.

Check that any drainage holes are free of debris inside them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious situations, you might need to consider replacing the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely the issue is more with the seal than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or it opens with an ease. Any competent DIYer can replace these in a matter of minutes.

Like all mechanical parts hinges are prone to be damaged over time. It is essentially a very simple procedure, but it is simpler when you have a person to assist in holding the frame in place.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a certain way or by improper installation in the factory. Sending us a picture through our website can often solve the issue. We are always happy to offer suggestions.

It is also crucial to grease the hinges regularly. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window open and close more easily. It can also reduce the possibility of a window sticking and help prevent corrosion. Ideally, you should do this once a year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. The hinges, also because of wear and tear, can become misaligned, this causes a gap to form where the sash joins the frame. If they're beyond repair, it might be necessary to have them realigned. The interlock, which is on the hinge side of the window, may also be misaligned, and again it is feasible to give them a good clean, but in certain cases, it may be necessary to get them replaced.

The seals may wear out or become damaged over time, allowing air escape. Replacing these with high-quality weatherstripping will help to keep draughts at bay. Another alternative is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures, and also reduce draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler, which can be placed over your window sill. These will help to block out cold air and keep your home warm and cosy!

With a little regular maintenance and repairs, your upvc windows will provide a great level of insulation and security for your home. However, it is important to recognise that all windows have a lifespan and they may reach an point at which it is more efficient to replace them than repair them. If you are experiencing issues with your Upvc Window Repair window it is recommended to speak with a professional immediately.