20 Things You Need To Know About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they are not susceptible to get rusty or decay.

Cleaning and lubricating regularly upvc window repair windows and doors is vital. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, Replacement it can cause a huge amount of damage to your home, making it extremely dangerous and possibly fatal. It is essential to make sure that your windows are in good working order.

For single pane windows, it can be relatively simple to replace them, and the replacement is usually able to fit into the old frame very easily. However when windows with double panes are secured by internal beading it will be more difficult to remove the existing panes and install new ones. In this instance, it is necessary to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the glass to ensure that any fragments of glass fall on the fabric instead of onto the floor where they could be trampled upon and cause further damage.

It's a great idea to cover the gap with tape after the glass is removed. This will keep drafts and water from entering your property until a professional is able to fix the window repair near me. This will also provide an obstruction to prevent intruders from making their way into your home. If the gap is large, you might think about an alarm door that comes with an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber sash windows. However, over time they are susceptible to a range of issues like sliding. A sagging window in uPVC can cause issues with light, draughts and even security. It is crucial to act immediately if you notice your uPVC windows are sliding.

To repair a window that is sagging, you can try to reposition the hinges. You'll first need to open the windows to access the frame. Then, you can remove the hinges on the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and check for fit. If you're satisfied with the fit, tighten the screws to ensure that they remain in the right place.

If you aren't able to move the hinges, you may require replacing the seal. Rubber seals can dry out and lose their elasticity with time, leading them to loosen. If this happens, it's important to replace the seal as quickly as possible to ensure your uPVC windows are watertight and safe from drafts.

uPVC handles may also become loose. The majority of the time it is due to screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need close the window and then perform an experiment to ensure that it fits. The corner joints of the sash need to align with the casing joint. If it isn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you wake up to wet floors and damp walls every time it rains it's crucial to take action. Leaks of water from windows can cause structural damage to your home, and hinder your ability to control the temperature in your home. The most common reason for leaks in uPVC windows is that the sealant around the frame has been damaged or not present.

This is a simple fix that can be done by any DIYer who has the ability. Depending on the severity of the issue the old caulking may require removal before a fresh layer can be applied. When it comes to uPVC repair, you must be careful not to over-caulk. This can make your window more difficult to clean and decrease its energy efficiency.

It is important to check that any drainage holes are clear of debris and that the sill pan has been angled correctly so that it drains away from the window. In more serious instances, you might need to consider replacing the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under humid conditions and can propagate quickly throughout the home.

It is also important to remember that if the leakage originates from the glass in your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and open in a breeze, it may be the hinges that are at the fault. Any competent DIYer can replace these in a matter of minutes.

Like all mechanical parts hinges will be damaged over time. It is very easy to replace a hinge on a window however it is simpler if you have someone to help you hold the frame.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. You can check this by checking for the arrows on each hinge, this shows which way the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window in a particular way or by inadequate installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are always happy to offer advice.

It is also essential to ensure that the hinges are lubricated on a regular basis. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window to operate and close more easily. It can also reduce the chance of windows sticking and help prevent corrosion. The ideal time to do this once a year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by different factors. Firstly the hinges, again because of wear and tear, could become misaligned. This can cause gaps to develop between the sash and the frame. If they are damaged beyond repair, it might be necessary to have them realigned. Second, the interlock can also become disaligned. This happens on the hinge's side and may need to be cleaned. In some cases it might be necessary to replace the hinges.

The second most frequent cause of draughts is the window seals. They are prone to wear or damaged over time, and let air escape through these gaps. Replacement of these with high-quality weatherstripping can help keep draughts at bay. Another alternative is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures and again will reduce draughts.

Another method of reducing the amount of draughts is to use a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. These will help to block out cold air and keep your home warm and cozy!

Your windows made of upvc will keep providing excellent insulation and security for your home by performing regular maintenance and repairs. It is essential to remember that all windows will eventually get worn out and it could be more cost-effective to replace them than to repair them. If you encounter any issues with your upvc window you should consult an expert immediately.