Why Is It So Useful During COVID-19

Ghost Immobiliser Installation

Install a ghost immobiliser on your car and protect it from car thieves. Our TASSA verified system protects vehicles from hacking, key cloning and immobiliser bypassing.

The system is hidden within your vehicle's wiring loom, so it is completely invisible to anyone who looks. It operates by creating pin code push sequences through existing buttons on steering wheel, door cards, and the centre console.

No circuit cuts

A car is a prized possession that you spend years of hard work to get, which is why car owners would want to secure their car from theft. But, traditional security systems such as alarms and wheel locks could easily be snatched away or bypassed by thieves. A ghost immobiliser, on the other hand, is a highly effective solution that is silent and is not easily detected by modern thieves.

A ghost immobiliser is a hidden device that connects to the CAN data network in your vehicle to disable the engine, without the use of radio frequencies or key fobs. It communicates with the ECU of your vehicle via buttons on the dash, steering wheel and door panels. This generates a unique pincode that is only accessible to you. The code can be altered at any time, and can contain up to 20 numbers based on your preferences. It comes with an emergency code you can use in the event of forgetting your PIN.

The ghost immobiliser can also be helpful to prevent a relay box in your home from transmitting the signal from your car key, which will open the doors and start your vehicle. It could even block techniques of stealing your car such as OBD port hacking. The device is small and weatherproof, which means it's difficult to see and even harder to tamper with.

Another advantage of the ghost immobiliser is that it can be put to your vehicle without permanent marks. This is ideal for those who are planning to sell their car in the near future. It's also much faster and easier to install than an original factory-fitted system.

The autowatch ghost immobiliser Ghost is a groundbreaking next-generation device that prevents theft of cars using contactless technology by connecting to the vehicle's CAN data network and using existing buttons to generate a unique PIN. This is a hidden system that can be put in place without cutting any wires, and does not require additional key fobs. It also connects to the vehicle's original ECU to prevent thieves from bypassing it by using a new key or replacing the ECU with the use of a "relay". This system has been TASSA-verified and is able to be linked to an International Security Register. Owners will have peace of mind, knowing that their vehicles are protected from theft.

No RF scanning

If you've invested an enormous amount of time and money into the customisation of your vehicle, you will want to protect it from theft. Installing an immobiliser is one of the best ways to stop theft. It will prevent your vehicle from beginning until you enter a unique code. You can create a 20-digit pin by pressing the buttons on your dashboard or the steering wheel. This will ensure that only you are allowed to drive your vehicle. It is also possible to create a service and valet mode that will allow you to start your car temporarily without having to enter the PIN code. This will allow your technician to work on your car without you being present. This feature is ideal for people who want to cut down on time and make their lives easier.

Ghost immobilisers, a new generation device, connects to the CAN data network of your vehicle. It uses buttons on the dashboard as well as the steering wheel to create a PIN code. It is designed to be discrete without any light or sound to make it obvious and can be installed anywhere on the vehicle, without impacting the look of your pride and joy.

This stealthy gadget is approved by TASSA and could lower the cost of insurance. It also comes with an ability to track your vehicle that allows you to locate your vehicle even if it's been stolen. This is especially useful when you own a unique expensive vehicle that you've spent time and effort to customize.

The Autowatch Ghost can be used in conjunction with an iPhone application that allows you to start your vehicle remotely if you forgot your PIN or not able to enter the vehicle due to a reason. This feature is ideal for those who need to go on errands or pick up your children and do not want to risk having someone else drive your vehicle. It is also helpful if you need to take your vehicle to a mechanic for maintenance or repair.

Another advantage of the Ghost is that it does not transmit or detect radio frequency signals, making it inaccessible to thieves using RF scanning or code grabbing technology. It also has the ability to protect your car against key cloning and ECU swapping, which are typical methods of theft from cars.

No key to cloning

Ghost immobilisers can be a great way to protect top-end vehicles and stop key cloning. They prevent your vehicle from being started without a PIN code being entered in conjunction with the regular key fob. This makes it difficult for thieves to steal your vehicle, and may deter them from doing it initially. This is a good idea in the event that your vehicle has been extensively customized or if it is a rare model.

The immobilisers are connected to the vehicle's CAN network and are completely hidden meaning that their presence isn't evident. It is also impossible for a thief to locate the device using radio frequency scanning or code technology for grabbing. This means that a thief will need to wait longer to steal your vehicle.

A criminal must be aware of the pin code and the location of the ghost in order to avoid it. However, the pin code will be specific to you and can be changed as often as you want. The pin code is easy to remember, but mathematically unattainable for someone else to figure out. In addition the engineer will provide you with a backup PIN code to override if you ever forget the pin.

The Ghost CAN Bus immobiliser can be easily installed anywhere on your vehicle. It is compatible with all vehicles and is fully customisable to match the style of your vehicle. It is also very affordable and simple to use. You can even transfer the device to another vehicle if you change cars during the lifetime of ownership, as long as the new vehicle is compatible with it.

The CAN bus is compatible with other security features. For instance, it can detect the damage to your vehicle and notify the owner. It could also stop the engine if the vehicle is damaged. The system will protect your vehicle from hacking as well as key duplicate. It can also detect any vibrations or contact with the vehicle. It can also notify the owner when the vehicle is moving.

No OBD port hacking

Ghost uses an immobiliser hidden in the module that is connected to the CAN data network in your vehicle that prevents thieves from gaining access to your vehicle to disable the alarm, or deactivate the key fob and generate new keys. This technology is a significant improvement over the traditional methods employed by thieves to steal vehicles in the past. The CAN data network means that the system will not be affected by disconnecting or replacing your battery.

The Autowatch Ghost Immobiliser Fitting Ghost is the world's first aftermarket CAN bus non-detectable immobiliser that guards against hacking, key-cloning and replica car theft. It does not use LED indicators or key fobs, instead leveraging the buttons in your steering wheel or centre console, as well as the door panels to let you create a unique PIN sequence (up to 20 button presses) that must be entered before you can drive your vehicle away.

Modern thieves employ diagnostics to identify circuit cuts on your vehicle and can bypass immobilisers that require a lot of wiring or are integrated into the wiring. The Ghost is weatherproof and doesn't require any additional wiring. It is not able to be identified by diagnostic tools that are professional. It can be installed even on vehicles equipped with anti-theft devices.

Another advantage of the Ghost immobiliser is that your vehicle can only be started by a person who knows the PIN code and has physical access to your vehicle. This is a major advantage over traditional security systems which can be bypassed by simple cable tampering or a screwdriver.

If you forget your PIN, you can reset it easily by using the emergency PIN override function on a mobile phone or computer. This is helpful if you are looking to start your vehicle after leaving it in a garage, or using the help of a valet parking service.

The Autowatch Ghost 2 has been certified for insurance by TASSA and Autowatch Ghost Immobiliser Fitting is able to be installed by our authorized installers. It has the QR fingerprint system to identify parts that are not in use that allow for the return of stolen items if they are discovered. It can also be set to'service mode', which allows the engine to be started when your vehicle is in a garage, or if you have valet parking, however, you'll need to enter your PIN code once more to exit the car.