12 Stats About Window Repair To Make You Seek Out Other People

Window Repairs

Window repairs can save homeowners money and help keep their homes warm. Window replacements may be required in the event of severe damage such as broken glass, or a shattered window frame.

But many other issues can be addressed to extend the lifespan of your windows. Common problems include:

Cracked or broken panes

It's a rock that's been being tossed by your lawnmowers, or a tree branch that has been blown by high winds, cracked window glass is not only visually unappealing, but also can result in higher electricity bills as the broken pieces allow cold air to enter your home. It's relatively easy to repair windows with damaged panes.

Begin by carefully removing glass using gloves and sunglasses. You may have use a utility knife to remove old glazing compound or putty around the frame's edges. Then, use a soft paper towel or cloth to clean the surface of the glass and the frame's wood.

After cleaning the area, apply a silicone caulking that is water-proof to the frame's edges. This will stop water from entering through the crack, which could cause further damage to both the frame and the glass.

A serious crack in double-paned glass can compromise the gas between the panes, rendering your windows less efficient in insulating. If the crack is significant enough to compromise the quality of the glass or if you have an inner pane that's totally missing, it's time to contact an expert.

Cracks in thermal stress can happen when there's a dramatic difference in temperatures between the outside and inside of your home, which causes the glass to expand or contract. If this happens to two portions of a window it's best to replace the window instead of trying to repair it.

Clear tape can be used to fill cracks in windows that are not yet ready to be replaced. It will also keep out cold winds and bugs. You can also cut a nylon stocking large enough to completely cover the crack and glue it with duct tape. This is not a permanent solution, but it's a good way to keep cold air out and insects away from your home. If you notice cracks appearing on your older windows it is recommended to contact the local company to determine if replacing the whole window is a better solution.

Rotten Wood

Wood rot is one of the most common problems with windows. It can affect the appearance of a house and can also be an hazard to safety. It is possible to repair the wood that has rotted. First, you must address the cause of the wood decay. Examine for leaks in the roof and other areas where water can enter the wood.

Next, you will need to take out any rotten parts of the window frame. This can be done with the claw hammer, window repairs chisel or a rasp. After you have removed the decayed wood, you'll need replace it with new wood. Pre-treated wood is recommended for this project, as it will resist the onset of rot. If you are unable to replace the timber that has rotted then you can use wood hardener and filler to reinforce the damaged area. Many hardware stores will sell this kind of product. To achieve the best results, adhere to the instructions on the label.

After you have repaired the damaged areas of the window sill, it is crucial to protect the area. Apply a water-resistant sealant the wood. Sikkens for instance, is a great product to apply.

You can also use an epoxy filler that is two-part to protect the wood from further damage. This product is easy to apply and provides a good finish. It is important to follow the directions on the label. After the epoxy filler has dried, you can smooth the wood's surface. Start with a rough sandpaper and then move on to an easier grade.

You don't want to expose your damaged area to more moisture. It is a good idea that's why you should cover the repaired surface with an oil-based prime that will protect it from water. After that, you can apply waterproof wood sealant.

It won't open

The reason a window won't open can be the result of many reasons. Wood frames can warp when exposed to rainy weather, or the house may have settled or someone could have nailed it shut for security reasons. However, with a little patience and the right tools, all windows that are stuck can be opened.

One of the main causes of windows that isn't opening is the accumulation of debris or gunk on its moving parts. Acme Glass notes that dirt and grime build up over time on the sliding tracks, hinges, and locks. Metal hardware can also rust when it comes into contact with humidity and direct sunlight. Maintaining these areas lubricated by spray grease will help prevent corrosion and keep your window working correctly.

The pulleys that raise or lower the window could become loose, or break. These components can lose their tension and get blocked especially when the window is two or more stories higher than the ground.

If you're having trouble opening a window try using a pry bar to gently push the window open a little at one time. Place a block of wood on the frame to give the pry bar more leverage, and be careful not to damage the window or wood. Alternately, you can run a hair dryer across the edges of the frame for several minutes to warm the wood and allow it move more easily.

Another issue for windows that aren't opening is a faulty spring that prevents the window jamb from rising or lowering. You will need to consult your owner's guide for Window Repairs more information depending on who made your windows.

If you've tried cleaning and lubricating the moving parts of your windows, but they aren't opening, it's probably time to replace windows. Homespire Windows & Doors offers windows that are energy efficient. Don't let the windows of your home go from functional to unusable. If a window isn't properly shut can leave your home vulnerable for water damage and burglary. Contact us to learn more about our windows replacement and services today!