15 Gifts For The Repairs To Upvc Windows Lover In Your Life

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they don't rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great amount of damage to your home, making it very hazardous and possibly fatal. It is essential to take the time to make sure that you are doing everything you can to ensure that your windows are in good repair.

Single-pane windows are relatively easy to replace, and they will usually fit into the frames that were previously in use very easily. However when windows with double panes are secured by internal beading, it'll be more difficult to take out the existing panes and install new ones. In this case it is essential to purchase plastic spacers in order to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor, where they could be trampled.

After the glass has been removed, it's a good idea to seal the gap with clear packaging tape or duct tape to stop water and drafts from entering the property until a professional can come out and fix the window. It also acts as a barrier that will prevent any intruders from getting access to your home. If the gap is large, you may be interested in an alarm door that comes with an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. As time passes, they may develop a variety of issues that include sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. It is crucial to act immediately if you notice your uPVC windows are sagging.

Repositioning the hinges could help fix a window that is sliding. You'll first need to open the windows so you can get at the frame. Then, you can remove the top and bottom hinges using a screwdriver, and then adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, shut your window and test it for fitting. If you're happy with the fit, you can tighten the screws to ensure that they remain in the right place.

If you are unable to reposition the hinges you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to loose their elasticity. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows are waterproof and safe from drafts.

uPVC handles may also become loose. Often, this is caused by screws that have become loose over time. However, it could occur because the handle mechanism has worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need to shut the window and then perform a test fitting. The corners of the sash should be aligned with the casing joint. If it doesn't then you can use the screwdriver to loosen up the handle. Then turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains it's crucial to take action. Water leaks through windows can cause structural damage to your home, and hinder your ability to control the temperature of your home. The most common cause for leaks in uPVC windows is that the sealant around the frame has been damaged or missing.

This is an easy fix that can be accomplished by any DIYer who is competent. Depending on how serious the problem is, the old caulking might need to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area harder to clean and reduce the efficiency of your energy.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more extreme cases, you may need to replace the window.

Moldy sills and rotten ones are another sign of water leakage. The mold thrives in damp environments and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed window, it is more likely the issue is more with the seal rather than the frame. This can be easily fixed by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open with a breeze It could be hinges at the fault. These are easily repaired by any DIYer who is skilled and can be completed in just a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and like any mechanical part they can wear down over time. It is very easy to replace a hinge on a window, but it's easier if someone else helps you hold the frame.

It is also important to verify that the uPVC hinges are opened and upvc window repairs closed in the right direction. This can be done by looking for the arrows on each hinge, this shows which way the window should be opened.

The issue could be caused either due to opening the window in the wrong way or a faulty installation in the factory. This can often be resolved by sending us a photograph on our website. We will be happy to give you advice.

Regular lubrication of the hinges is essential. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It can also prevent corrosion and reduce the possibility of sticking. It is recommended to do this at least once a year. WD40 or other solvent-based lubricants are not recommended as they could damage your upvc repairs windows.

5. Draughts

Draughts in upvc windows can be caused by a variety of various factors. Firstly the hinges, again because of wear and tear, can become misaligned, this can cause gaps to develop where the sash joins the frame. These can be easily fixed by giving them a thorough clean, however if they are beyond repair it might be necessary to have them realigned or replaced. The second is the interlock, which is on the hinge side of the window, may also be misaligned, and again it is possible to give them a good clean, but in some cases it might be necessary to get them replaced.

The second most frequent cause of draughts is the window seals, these are susceptible to being worn out or damaged over time, and let air escape through these gaps. Installing high-quality weatherstripping will help to stop draughts. Replace the windows made of upvc with low-emissivity glasses. This will help regulate indoor temperatures, and reduce the risk of draughts.

The final method to cut down on the amount of draughts is to use a draught-excluder. These are usually fabric tubes filled with a filler which can be hung over your window sill. These will keep your home warm by blocking cold air.

Your upvc windows can keep providing excellent insulation and security to your home with regular maintenance and repairs. It is crucial to keep in mind that all windows eventually become worn out, and it is more cost-effective to simply replace them than to repair them. So, if you are experiencing issues with your Upvc windows, it is recommended to seek help from a professional as soon as you can.