Why Everyone Is Talking About Autowatch Ghost Immobiliser Fitting Right Now

Ghost Immobiliser Installation

Add a ghost immobiliser your vehicle to protect it from car thieves. Our TASSA certified system guards vehicles from hacking, key cloning and immobiliser bypassing.

The system is hidden within the wiring loom of your vehicle, which makes it completely inaccessible to anyone who sees it. It works by creating a pin code push sequence through existing buttons on the steering wheel, door Ghost Immobiliser Installation cards and centre console.

No circuit cuts

It's not a surprise that people want to protect the vehicle they've put so much effort into buying. However, traditional security devices such as wheel locks and alarms can easily be cut off or bypassed by thieves. ghost immobiliser problems immobilisers are a very effective and efficient solution that operates in silence and isn't recognized by modern day thieves.

A ghost immobiliser is a hidden device that connects to the CAN data network of your vehicle to disable the engine without the use of radio frequencies or key fobs. It communicates with the vehicle's ECU through existing buttons on the steering wheel, dash, and door panels to generate a unique pin code that you only are aware of. The code can be changed at any time, and can contain up to 20 digits based on your preference. It also includes a secure emergency code you can use if you forget your PIN.

The ghost immobiliser can also be used to block relay boxes from transmitting the car key's signal inside your home, which will unlock the doors and start the vehicle. It can also block high-tech methods to steal your vehicle, including OBD port hacking. The device is tiny and weatherproof, meaning it's difficult to detect and is even more difficult to interfere with.

Another benefit of the ghost immobiliser is that it can be put to your vehicle without permanent marks. This makes it perfect for those who are planning to sell their car in the near future. It's also a lot more efficient and less time-consuming to install than an original factory-fitted system.

The Autowatch Ghost is a groundbreaking next-generation device that can stop vehicles that are stolen through contactless by connecting to the vehicle's CAN data network and using existing buttons to generate a unique PIN code. It is a discreet device that can be installed without wires being cut and does not require additional key fobs. It is also connected to the vehicle's original ECU to prevent thieves from gaining access by using a new key or replacing the ECU with an "relay". This system is TASSA-certified and is compatible with an International Security Register. Owners will be able to rest easy knowing that their vehicle is protected from theft.

No scanning by RF

You'll want to safeguard your vehicle from theft if have spent a lot of money and time customizing it. One of the best ways to do this is by installing an immobiliser. This will prevent your engine from running until you enter a unique PIN code. Using the buttons on your steering wheel and dashboard, you can generate an up to 20 digits long that is only known by you, and ensure that only you have access to your vehicle. It is also possible to create a service and valet mode that allows you to start your car temporarily without entering the PIN code. This allows your technician to work on your vehicle without your presence. This is a great option for those who want to reduce time and simplify their lives.

Ghost immobilisers are next generation device that connects to the vehicle's CAN data network, and uses the buttons on the dashboard and steering wheel to program a personal PIN code. It is designed to be discrete without any light or sound to signal it and can be installed anywhere on your vehicle without disturbing the aesthetics of your pride and joy.

This stealthy gadget has been approved by TASSA and could lower the cost of insurance. It comes with a tracking feature that allows you to locate your vehicle, even if it's gone missing. This is a great feature when you own a unique expensive car ghost immobiliser which you've invested time and effort to customize.

The Autowatch Ghost can be used in conjunction with an iPhone application that allows you to start your car remotely if you forget your PIN or are not able to access the vehicle due to some reason. This feature is ideal if you have to go on errands or drop off your kids but don't want to risk having someone else drive your vehicle. It can also be helpful in the event that you need to bring your vehicle to a mechanic for maintenance or repair.

The Ghost has the advantage that it doesn't transmit or detect radio frequency which means it's not detected by thieves who employ RF scanning and code grabbing technologies. It can also safeguard your car from key copying and ECU swapping, which are common methods of car theft.

No key cloning

Ghost immobilisers are an excellent option for protecting high-end vehicles and are designed to prevent key copying. They work by preventing your car from starting unless an additional PIN code is entered in conjunction with the regular key fob. This makes it more difficult for thieves to steal your vehicle, and can deter them from attempting. This is a good idea in the event that your vehicle has been heavily modified or is a rare model.

The immobilisers are connected to the vehicle's CAN data network onboard and are completely concealed, which means their presence isn't visible. It is also impossible for a burglar to detect the device by using radio frequency scanning or code grabbing technology. This means that a burglar must spend a lot more time to get your vehicle.

To bypass the system a thief must be aware of the unique pin code and the location of the Ghost. The pin code is unique to you and can change it as many times as needed. The pin code is easy to remember, but mathematically unattainable for someone else to work out. In addition the engineer will provide you with an emergency PIN code that can be used to bypass the pin in case you forget the pin.

The Ghost CAN bus immobiliser is weatherproof, and can be installed in any area of your vehicle. It is compatible with all vehicles and completely customizable to match the look of your car. It is also very easy to use and is affordable. The device can be moved to a different vehicle, if it is compatible with the new vehicle.

The CAN bus is compatible with other security features. It can, for example detect damage to the vehicle and notify the owner. It will also shut off the engine if it senses that the car is being manipulated. The system can protect your vehicle from hacking and key duplicate. It can also detect vibrations and contact with the vehicle. It can also notify the owner when the vehicle is moving.

No OBD port hacking

Ghost is a hidden immobiliser module connected to your vehicle's CAN data network which stops thieves from gaining access to your vehicle to disable the alarm, deactivate the key fob, and then code new keys. This technology is a step up over the old methods used by thieves to steal vehicles in the past. The CAN data network also means that your system will not be affected if you disconnect or change your battery.

The Autowatch Ghost is the world's first aftermarket CAN bus non-detectable immobiliser that protects against hacking, key-cloning and replica car theft. It is not equipped with LED indicators or key fobs, instead using the buttons on your steering wheel, centre console and door panels to let you create a unique PIN code sequence (up to 20 button presses) that must be entered first before you can drive your car away.

Modern thieves can use diagnostics to detect circuit breaks on your vehicle. They can bypass immobilisers which require a lot of wiring or are integrated into the wiring. The Ghost is weatherproof and doesn't require any additional wiring. It cannot be detected by professional diagnosis tools. It can even be fitted on vehicles equipped with anti-theft devices.

A Ghost immobiliser comes with a major benefit: your car can only start by someone who knows your PIN code and has physical access to your vehicle. This is a big advantage over traditional security systems which are able to be bypassed using cable tampering, a screwdriver or a universal remote controller.

If you forget your PIN, you can reset it easily by using the emergency PIN override function on a mobile phone or computer. This is useful if you want to start your vehicle after it has been left in a garage, or with the valet parking service.

The Autowatch Ghost 2 has been certified for insurance by TASSA and is able to be installed by our authorized installers. It features an RFID fingerprint system that can identify individual parts that allow for the return of stolen items in the event that they are found. It can also be turned into a service mode', which allows the engine to start when your vehicle is parked in a garage or with valet parking however, you must enter your PIN again to exit the car.