15 Gifts For The Repairs To Upvc Windows Lover In Your Life

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they are not susceptible to rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and even be fatal. It is crucial to take the time to ensure that you're doing everything you can to keep your windows in good repair.

For single pane windows, it can be relatively simple to replace them, and the new window will generally fit within the frame of the previous one easily. If you have double-paned windows which are held together by internal beading, it will be harder to remove and replace the old panes. In this case it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you're planning attempt to remove the window panes yourself it is crucial to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric, not onto the floor, where they could be trampled.

It's a great idea to cover the gap with tape after the glass is removed. This will stop drafts and water from entering your property until a professional arrives to repair the window. This also serves as a barrier to prevent any criminals from getting into your home. If the gap is large, you might be interested in an alarm door that comes with an integrated window, as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could be affected by a variety of issues such as sagging. A sagging uPVC windows can cause problems with light, draughts and even security. It is crucial to act when you realize that your uPVC windows are falling down.

To fix a window that is sagging you can try to reposition the hinges. To accomplish this, you'll need open the window to get to the frame. Then, using a screwdriver, you can unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, close your window and verify the fit. If you're satisfied with the fit, tighten the screws until they remain in place.

If you can't reposition the hinges, you might require replacing the seal. As time passes, rubber seals lose their elasticity and become dry which causes their tightness to decrease. It is crucial to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles could also loosen. The majority of the time, this is caused by screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. Fortunately, it's easy to repair a loose uPVC window handle yourself. First, you'll need close the window and then perform an experiment to ensure that it fits. The corner joints of the sash must be aligned with the casing joint. If it doesn't then you can make use of a screwdriver to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains, it's important to take action. Windows that leak water do can not only cause degradation of your home's structure but also hamper your efforts to regulate the temperature within your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be done by any DIYer who is competent. Depending on the severity of the issue the caulking used previously might need to be removed before a new layer of caulk is applied. It is important to remember that when it comes to uPVC window repairs, do not be tempted to apply too much caulk and then make the area more difficult to clean and could reduce your energy efficiency.

Make sure that the drainage holes do not have debris inside them and that the sill pan has been properly angled to allow the water to drain from the window. In more serious cases you might need to consider replacing the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and can quickly spread throughout the home.

It is also important to note that if the leak originates from the glass of your double-glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open with ease It could be hinges that are at fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical part, hinges can wear out over time. It is essentially a simple procedure, but it is easier to do if you have someone to help hold the frame in place.

Check that the uPVC hinges are open and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a certain way or due to improper installation in the factory. This can often be resolved by sending us a photo through our website and we will be happy to give you suggestions.

It is also essential to ensure that the hinges are lubricated on a regular basis. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window to open and close more easily. It can also lower the chance of windows getting stuck and stop corrosion. This must be done at a minimum once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window repair.

5. Draughts

Draughts can be caused by a variety of different things. Firstly the hinges, again due to wear and tear may become displaced, which causes gaps to develop between the sash and the frame. If they're beyond repair, it could be necessary to have them realigned. Secondly the interlock, this is located on the hinge side of the window, may also be misaligned, and again it's feasible to give them a clean but in some instances it could be necessary to get them replaced.

The next most common reason for draughts are the window seals. They are prone to wear or damaged over time and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass, which will help regulate indoor upvc window repairs temperatures and again will lessen draughts.

Another, and most effective ways to cut down on drafts is to use an draught excluder. These are usually fabric tubes which are filled with a sort of filler and can be put on the windowsill on top. They will keep your home warm by blocking out cold air.

The windows made of upvc can keep providing excellent insulation and security for your home with regular maintenance and repairs. However, it is important to realize that windows last for a certain period of time and eventually, they will reach an point at which it is more efficient to replace them than repair them. So, if you are having issues with your upvc windows, it is recommended to seek assistance from a professional as soon as possible.