17 Signs To Know If You Work With Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will reduce unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and may even be fatal. It is important to make sure that your windows are in good condition.

For single pane windows it can be relatively simple to replace windows, and the new one will usually fit inside the old frame very easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the old panes. In this case, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass yourself. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass, so that any shards will fall on the fabric instead of onto the floor, where they could be trampled on and cause further damage.

It's a good idea to tape the gap once the glass is removed. This will prevent water and drafts from entering your home until a professional is able to fix the window. This also serves as an obstruction to prevent intruders from getting into your home. If the gap is large, you might be interested in a security door repair that has an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. As time passes, they may develop a variety of issues such as sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. It is crucial to act immediately if you notice your uPVC windows are falling down.

To fix a sagging window you can try repositioning the hinges. To accomplish this, you'll need open the window to get to the frame. Then, using an screwdriver, take off the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you have relocated your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they remain in position.

If you are unable to reposition the hinges you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, causing them to loose their elasticity. It is important to replace your seal as soon as you can in order to ensure that your uPVC window watertight and Window Repair draughtproof.

UPVC handles can also become loose. Often it is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has been worn out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. First, you'll need close your window and do a test fit. The corner joints of the sash must be aligned with the casing joint. If it doesn't then you can use the screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains, it's crucial to take action. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature in your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is damaged or missing.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Depending on how serious the problem is, the old caulking may have to be removed. When it is time to uPVC repair, it is important to avoid over-caulking. This can make your window harder to clean and decrease its energy efficiency.

Make sure that the drainage holes have no debris inside them and ensure that the sill pan is properly angled to allow the water to drain from the Window Repair. In more severe situations, you may have to replace the window.

Mold spots and rotted sills are also signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed glass it is more likely the issue is related to the seal, not the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open, or if it opens in a breeze. Any competent DIYer can replace hinges in just a few minutes.

Like all mechanical parts, hinges can be damaged over time. The process of replacing a hinge on a window is essentially a very simple process but it can be simpler when you have a person to assist in holding the frame in place.

Verify that the uPVC hinges open and close in the proper direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The issue can be caused by opening the window incorrectly or by a poor installation in the factory. Sending us a photo through our website can often solve the issue. We are happy to give suggestions.

It is also crucial to lubricate the hinges regularly. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window to open and close more easily. It can also prevent corrosion and reduce the possibility of sticking. This is recommended to be done at least once a year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by different factors. First, the hinges due to wear and tear may become displaced, which can cause a gap to form where the sash joins the frame. They can be fixed by giving them a good cleaning, but in the event that they are beyond repair it might be necessary to have them re-aligned or replaced. In addition, the interlock could also become misaligned. This is located on the hinge side and could require to be cleaned. In some instances, it may be necessary to replace these.

The next most common reason for draughts is window seals. They are prone to wear or damaged over time and allow air to escape through these gaps. Installing high-quality weatherstripping can help keep draughts at bay. Another option is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and will lessen draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler that can be placed over your window sill. These will help to stop cold air from entering and keep your home warm and cosy!

Your windows made of upvc will keep providing excellent insulation and security for your home with a little regular maintenance and repairs. It is crucial to keep in mind that all windows eventually become worn out, and it could be more cost-effective to replace them than to repair them. So, if you are experiencing problems with your upvc windows, it is always best to seek professional assistance as soon as possible.