20 Things You Should Know About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they don't corrosion or rot.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will help prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, which can make it very dangerous and potentially fatal. It is essential to take the time to ensure that you're doing all you can to keep your windows in good shape.

For single pane windows, it can be relatively simple to replace them, and the replacement will generally fit within the frame of the previous one easily. If you have double-paned windows which are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this instance you'll need to find some plastic spacers to assist the new pane to fit correctly into the frame of the window.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes so that any shards fall on the fabric and not on the floor and could be trampled.

Once the glass is removed and the glass is removed, UPVC Window Repairs it's a good idea to cover the gap with packaging tape or duct tape to block water and drafts from getting into the property until a professional can come out and fix the window. It also acts as a barrier, deterring any intruders to gain access into your home. If the gap is particularly large, you may think about the security door with an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. However, over time, they may be afflicted by a variety of issues, including sliding. A sagging uPVC window can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to prevent the problem from worsening.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to open the windows to reach the frame. After that, using an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the fit of your window, tighten the screws to secure them in place.

If you can't reposition the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes their tightness to decrease. If this happens, it's important to replace the seal as soon as possible to ensure your uPVC windows remain watertight and secure from draughts.

UPVC handles can also become loose. This is typically caused by screws that have loosened over time, but it can be due to the handle mechanism getting worn out. It's a good thing that it's simple to fix a loose uPVC window handle yourself. First, you'll need to shut the window and do an experiment fitting. The corners of the sash must align with the casing joint. If it isn't then you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains, it's crucial to take action. Water leaks from windows can not only cause degradation of your home's structure but also undermine your efforts to regulate the temperature within your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be completed by any DIYer who has the ability. Based on the severity of the issue the caulking used previously may need to be removed before a fresh layer is applied. It is crucial to keep in mind that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area harder to clean and could reduce your energy efficiency.

Verify that the drainage holes do not have debris inside them and that the sill pan is angled correctly to drain away from the window. In more serious cases you might have to consider replacing the window.

Mold spots and rotten sills are another sign of water leakage. This fungus thrives in damp conditions and can quickly spread across the home.

If the leakage occurs between the double glazed window repairs-glazed glass, it is more likely the issue is more with the seal than the frame. It is also possible to be repaired by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or if it opens in the breeze. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that have hinges and like any mechanical part they will wear out over time. It's easy to replace a hinge on a window, but it's simpler if you have someone to help you to hold the frame.

It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. You can check this by looking for the arrow on each hinge, this indicates the direction in which the window should open.

Faulty window repair near me hinges could be caused by improperly opening the window a certain manner or because of improper installation in the factory. Sending us photos via our website is often enough to solve the issue. We are happy to offer suggestions.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant to the hinges is an ideal way to do this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the risk of a window sticking and help prevent corrosion. The ideal time to do this at least once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different factors. The hinges can also become unbalanced due to wear, creating gaps between the frame and sash. If they are beyond repair, it might be necessary to have them realigned. The second is the interlock, which is on the hinge side of the window, may be misaligned. Again, it may be possible to give them a clean but in some cases it might be necessary to get them replaced.

The seals may wear out or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures and will reduce the possibility of draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler that can be put on top of your window sill. These will keep your home warm by blocking out cold air.

The windows made of upvc can remain a great source of insulation and security for your home with a little regular maintenance and repairs. However, it is important to recognise that all windows have a life span and eventually, they will reach the point when it's more cost-effective to replace them rather than fix them. If you are experiencing problems with your upvc windows, it is always recommended to seek assistance from a professional as soon as you can.