20 Up-And-Comers To Watch In The Repairs To Upvc Windows Industry

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't get rotten or rusty like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge amount of damage to your home, which can make it extremely dangerous and possibly fatal. It is crucial to take the time to make sure that you're doing all you can to ensure that your windows are in good condition.

For single pane windows it is relatively easy to replace them, and the replacement will generally fit within the old frame very easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the old panes. In this situation you'll need to source some plastic spacers that aid the new pane in being able to fit properly into the window frame.

If you're planning to attempt to remove the glass panes yourself it is crucial to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes to ensure that any shards fall on the fabric and not on the floor which could cause them to be trampled under.

Once the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional comes out and repair the window. It also acts as an obstruction to prevent criminals from getting into your home. If the gap is particularly large, you might want to consider using a security door that has an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can develop a number of problems that include sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. It is crucial to act when you discover that your uPVC windows are sliding.

To fix a sagging window you can try to reposition the hinges. To do this, you'll need to open the window so that you can access the frame. You can then unscrew both the hinges at the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you have repositioned your hinges. If you're satisfied with the fit of the window, you can tighten screws to secure them in the right position.

If you are unable to move the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause their tightness to decrease. It is crucial to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. This is usually due to screws that have become undone over time, but it could be due to the handle mechanism wears out. Luckily, it's not difficult to fix the loose uPVC window handle yourself. First, you'll need close your window and do an experiment to ensure that it fits. The corner joints of the sash must be aligned with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into the position it was in.

3. Water Leaks

It is important to take action if you get up each morning to discover mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home, and affect your ability to regulate the temperature of your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be completed by any competent DIYer. Based on the severity of the issue the old caulking might need to be removed before a new layer of caulk is applied. It is crucial to remember that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk' as this will only make the area harder to clean and reduce your energy efficiency.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more serious situations, you may have to replace the window.

Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to remember that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your Upvc window repair windows are brittle to open, or slack and blow open with ease it could be hinges that are at the fault. These are easily repaired by any skilled DIYer and can be completed in a matter of minutes.

Most households in the UK will have top-hung or side hung uPVC windows that have hinges and like any mechanical part they are susceptible to wear and tear over time. It's very simple to replace a hinge on a window, upvc window repair but it's easier if someone helps you to hold the frame.

Check that the uPVC hinges are open and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window a certain manner or because of poor installation at the factory. Sending us photos via our website is often enough to resolve the problem. We are always happy to give assistance.

It is also essential to grease the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is an ideal method of doing this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also reduce the possibility of a window sticking and help prevent corrosion. This should be done at least every year. WD40 and other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by different factors. The hinges, also due to wear and tear can become misaligned, this causes a gap to form where the sash meets the frame. If they're beyond repair, it could be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge side of the window, may also become misaligned, again it is possible to just give them a thorough clean, however in some cases it might be necessary to have these replaced.

The second most frequent cause of draughts is the window seals. These are prone to wear or damaged over time, and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help control indoor temperatures and lessen the risk of draughts.

The final method to cut down on the amount of draughts is to use a Draught-excluder. These are usually fabric tubes filled with a filler which can be put on top of your window sill. They can keep your home warm by blocking out cold air.

The windows made of upvc can keep providing excellent insulation and security to your home with a little regular maintenance and repairs. However, it is important to realize that all windows have a life span and there may come the point when it's more cost-effective to replace them rather than fix them. If you encounter any issues with your upvc window it is recommended to speak with a professional as soon as possible.