17 Signs To Know If You Work With Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain, durable and long-lasting. They do not rot or rust like aluminum or timber.

It is important to clean and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great amount of damage to your home, which can make it extremely dangerous and possibly fatal. You should take the time to make sure that your windows are in good shape.

For single pane windows, it can be relatively simple to replace them, and the replacement will generally fit within the frame that was previously installed easily. If you have double-paned windows that are held together by internal beading, it will be more difficult to remove and replace the old panes. In this case, you will need to locate some plastic spacers to assist the new pane to fit correctly into the window frame.

If you are going to attempt to remove the window panes by yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the glass to ensure that any shards will fall onto the cloth instead of onto the floor where they could be trodden under and cause further damage.

It's a great idea to tape the gap once the glass has been removed. This will keep water and drafts from entering your property until a professional comes out to fix the window. This will also act as a barrier, preventing any intruders to gain access into your home. If the gap is large, you may want to consider using an alarm door that comes with an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows with sash. Over time, they can develop a variety of issues such as sagging. A sagging uPVC window can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from worsening.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to open the windows so you can get at the frame. Then, using an screwdriver, unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after having relocated your hinges. If you're happy with the fit, you can tighten the screws to ensure they remain in the right place.

If you are unable to reposition the hinges, you may have to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause their tightness to decrease. It is essential to replace your seal as soon as you can in order to ensure that your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. Most often, this is caused by screws that have come loose over time. However, it can also happen because the handle mechanism has worn out. Fortunately, it's easy to fix the handle of a window that is loose yourself. First, you'll need to close your window and do an initial test fit. The joint at the corner of the sash must align with the joint on the casing. If it doesn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains, it's important to take action. Leaks of water from windows can cause structural damage to your home and also hinder your ability to control the temperature in your home. The most common cause for leaking upvc window repairs windows is that the sealant surrounding the frame is damaged or is missing.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the problem the caulking that was used up may need to be removed before a new layer of caulk is applied. It is crucial to remember that when it is about uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and decrease the efficiency of your energy usage.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious cases, you may need to replace the window.

Mold spots and rotten sills are also signs of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to remember that if the leakage originates from the glass in your double glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sagging. It is also possible to be fixed by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or if it blows open with a breeze. These are easily replaced by any competent DIYer and can usually be completed in just a few minutes.

Like all mechanical parts hinges will be damaged over time. It's easy to change a window hinge however it is easier if someone helps hold the frame.

Make sure that the uPVC hinges are closed and open in the proper direction. You can do this by looking for the arrow on each hinge. This indicates the direction in which the window should open.

Window hinges that aren't working properly could be caused by improperly opening the window in a particular manner or because of improper installation in the factory. It is usually possible to fix the issue by sending us a picture on our website. We will be happy to give you suggestions.

Regular lubrication of the hinges is essential. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also decreases the possibility of a window sticking and help prevent corrosion. The ideal time to do this once a year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by different factors. The hinges may also become unbalanced due to wear, which can cause a gap where the sash and frame meet. If they're beyond repair, it may be required to realign them. In addition, the interlock could also become misaligned. This is located on the hinge's side, and could require to be cleaned. In certain instances, it may be necessary to replace them.

The second most frequent reason for draughts are the window seals. They can become worn down or damaged over time and will allow air to escape through the gaps. Installing high-quality weatherstripping will help to prevent draughts. Another option is to replace the upvc window with low-emissivity glass, which will help regulate indoor Window Repairs temperatures and again will reduce the possibility of draughts.

The final method to cut down on drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler, which can be placed over your window sill. These will help to block out cold air and keep your home warm and cosy!

With a little maintenance and repair your windows made of upvc will provide an excellent level of insulation and security for your home. However, it is important to realize that windows last for a certain period of time and eventually, they will reach the point when it's more economical to replace them than repair them. If you are having issues with your upvc windows, it is recommended to seek assistance from a professional immediately.