15 Gifts For The Repairs To Upvc Windows Lover In Your Life

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they don't corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, which can make it very dangerous and potentially fatal. You should take the time to ensure that your windows are in good shape.

Single-pane windows are relatively simple to replace and will usually fit into the old frames very easily. However If you have double-pane windows that are anchored by internal beading it will be more difficult to remove the old panes and put in new ones. In this situation you'll need find some plastic spacers that will aid the new pane in being able to fit correctly into the frame of the window.

Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. It is also a good idea to lay down a dropcloth before you start working on the glass, so that any shards fall onto the cloth rather than on the floor, where they could be trampled on and cause further damage.

It's a great idea to tape the gap once the glass is removed. This will stop drafts and water from getting into your home until a professional is able to fix the window. This will also act as a barrier, deterring any intruders from gaining entry to your home. If the gap between the window and the door is large, you might prefer security screens that includes windows. This will provide the best of both.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. Over time, they can be affected by a variety of issues that include sliding. A window that isn't properly aligned can cause problems with light, draughts or Upvc window repairs even security. It's important to take action when you realize that your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window which is sliding. To do this, you'll need to open the window to get to the frame. After that, using the screwdriver, you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, close your window and test it for fitting. If you're satisfied with the fit, tighten the screws to ensure they stay in position.

If you can't reposition the hinges, you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to loosen. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows are watertight and safe from drafts.

uPVC handles may also loosen up. This is often caused by screws that have been removed over time, but it can also be caused by the handle mechanism getting worn out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. First, you'll need to close your window and do a test fit. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can use a screwdriver to loosen the handle and then return the mechanism to its original the position it was in.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains, it's important to take action. Leaks of water from windows can cause structural damage to your home and impact your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be done by any DIYer who is competent. Depending on the severity of the problem the old caulking might need to be removed before a fresh layer is applied. It is important to remember that when it is about uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area harder to clean and can reduce the efficiency of your energy.

Verify that the drainage holes have no debris in them, and also that the sill pan is properly angled to drain away from the window. In more severe instances, you may need to replace the window.

Moldy sills and rotten ones are another sign of water leakage. This is a fungus that thrives in damp conditions and can quickly spread throughout the house.

It is also important to note that if the leak originates from the glass in your double glazed window repairs glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or it opens in a breeze. They can be replaced by any competent DIYer and can usually be done within a few minutes.

Like any mechanical component, hinges can wear out over time. It is essentially a very simple process but it can be easier when you have a person to assist in holding the frame in place.

It is also important to verify that the uPVC hinges are opening and closed in the right direction. Check for the arrows on each hinge to determine which direction the window repairs should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window a certain way or by inadequate installation at the factory. Sending us photos via our website is often enough to solve the issue. We are always happy to give advice.

It is also important to ensure that the hinges are lubricated on a regular basis. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. This is recommended to be done at least once a year. WD40 or other solvent-based oils should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by various factors. The hinges can also be unbalanced due to wear, causing gaps between the frame and sash. This can be easily repaired by giving them thorough clean, however when they're beyond repair, it might be necessary to have them realigned or replaced. In addition, the interlock could also become unbalanced. This is located on the hinge's side, and could require to be cleaned. In certain instances, it may be necessary to replace these.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to keep draughts at bay. Another option is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and will reduce the possibility of draughts.

One of the most effective ways to cut down on the draughts in your home is to use a draught excluder, these are typically fabric tubes that are filled with some kind of filler. They can be placed on the top of your windowsill. They can help keep cold air out and keep your home warm and cosy!

Your windows made of upvc will remain a great source of insulation and security for your home by performing regular maintenance and repairs. However, it is important to recognize that all windows have a lifespan and there may come an point at which it is more efficient to replace them than repair them. If you are experiencing issues with your Upvc windows, it's recommended to seek help from a professional as soon as you can.