15 Of The Most Popular Pinterest Boards Of All Time About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to decay or rust as aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, Upvc Window Repair it could cause a large amount of damage to your home, making it very hazardous and possibly fatal. It is important to take the time to make sure that you're doing all you can to ensure that your windows are in good shape.

For single pane windows it is relatively easy to replace them, and the replacement will usually fit inside the old frame very easily. However, if windows with double panes are anchored by internal beading it will be more difficult to get rid of the existing panes and install new ones. In this situation, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

Wearing protective eyewear and thick gloves is essential if you plan to remove the glass by yourself. You should also lay down a dropcloth before you begin working on the window panes so that any shards of glass fall onto the fabric, not onto the floor and could be trampled under.

After the glass has been removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to block water and drafts from getting into the home until a professional is able to come out and fix the window. This will also act as a barrier that will prevent any intruders from getting access into your home. If the gap is large, you might think about a security door that has an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. However, over time, they may be afflicted by a variety of issues like sliding. A sagging window can cause problems with light, draughts or even security. It's important to take action immediately if you notice your uPVC windows are falling down.

To fix a sagging window you can try to reposition the hinges. You'll first need to open the windows to reach the frame. Then, you can remove the hinges at the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close the window and check for fit. If you're happy with the fit, you can tighten the screws until they remain in the right place.

If you aren't able to move the hinges you may need to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to lose their tightness. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles could also loosen. This is usually due to screws that have loosened over time, but it can be caused by the handle mechanism wearing out. Fortunately, it's easy to fix a loose uPVC window handle yourself. You'll first need to close the window and then perform an experiment fitting. The joint at the corners of the sash should align with the joint on the casing. If it isn't then you can make use of a screwdriver to loosen the handle and reverse the mechanism back into position.

3. Water Leaks

If you wake up to damp floors and mouldy walls every time it rains it's crucial to take action. Water leaks through windows can cause structural damage to your home and impact your ability to regulate the temperature in your home. The most common cause for leaking uPVC windows is that the sealant around the frame is either damaged or not present.

This is an easy fix that can be done by any DIYer who is competent. Depending on how severe the problem is, the old caulking may need to be removed. When it comes to uPVC repair, it is important to avoid 'over-caulking'. This will only make your window more difficult to clean and decrease its energy efficiency.

Check that any drainage holes do not have debris in them, and also that the sill pan is angled correctly to drain away from the window. In more serious instances, you may need to think about replacing the window.

Mold spots and rotten sills are also signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread across the house.

It is also important to note that if the leak originates from the glass of your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sliding. It is also possible to be repaired by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open in a breeze, it may be hinges that are at the fault. These are easily repaired by any DIYer who is skilled and are usually completed in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that have hinges and, just like any mechanical component they will wear out over time. It's very simple to replace a hinge on a window but it's much easier if someone helps you to hold the frame.

It is also important to ensure that the Upvc Window Repair hinges are opening and closed in the correct direction. Look for the arrows on each hinge to determine which direction the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a particular way or by poor installation at the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be more than happy to give you suggestions.

Regularly lubricating the hinges is essential. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. The ideal time to do this once a year. WD40 and other solvent-based lubricants should not be used as they can cause damage to your upvc window repairs windows.

5. Draughts

Draughts can be caused by different factors. The hinges may also become misaligned due to wear, creating an opening where the sash and frame meet. If they're beyond repair, it might be necessary to have them realigned. The second is the interlock, which is on the hinge side of the window and can also become misaligned, again it may be possible to give them a clean but in some cases it might be necessary to have these replaced.

The next common reason for draughts is window seals, these are prone to wear or damaged over time, and allow air to escape through the gaps. Installing high-quality weatherstripping is a good way to stop draughts. Replace the upvc windows with low-emissivity glass. This will help regulate indoor temperatures and lessen the possibility of draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler which can be hung over your window sill. They can help block out cold air and keep your home warm and cosy!

With a little regular maintenance and repair windows made of upvc will continue to provide excellent insulation and security for your home. However, it is important to recognise that all windows have a lifespan and eventually, they will reach a point where it is more efficient to replace them than repair them. If you are experiencing issues with your window made of upvc you should consult a professional as soon as possible.