"A Guide To Autowatch Ghost Immobiliser Fitting In 2023
Ghost Immobiliser Installation
Secure your prized possessions from car thieves by putting in a ghost immobiliser. Our TASSA confirmed system safeguards vehicles against hacking, key cloning and vehicle immobiliser bypass.
The system is hidden inside the wiring loom of your vehicle and is inaccessible to anyone who is looking. It operates by generating pin code push sequences through buttons already present on the steering wheel, door cards, and centre console.
No circuit cuts
It's not surprising that owners want to protect the vehicle they've put so much effort into buying. However, traditional security devices like alarms and wheel locks could easily be cut off or taken over by thieves. A ghost immobiliser is a very effective and efficient solution that operates in silence and can't be identified by modern thieves.
A ghost immobiliser is a hidden device that connects to the CAN data network in your vehicle to disable the engine without the use of radio frequencies or key fobs. It communicates with the ECU of your vehicle through buttons on the steering wheel, dash and door panels. This creates an unique pincode only accessible to you. The code can be altered at any time and can be as long as 20 digits long, depending on your preference. It also has an emergency code that you can use in the event of forgetting your PIN.
The ghost immobiliser can also be helpful to prevent a relay box in your home from transferring the signal from your car key, which could unlock the doors and start your vehicle. It also blocks sophisticated methods to steal your vehicle, like OBD port hacking. The device is tiny and weatherproof, meaning it's difficult to see and is even more difficult to interfere with.
Another benefit of the ghost immobiliser is that it can be put to your vehicle without permanent marks. This makes it perfect for those who are planning to resell their car in the future. It's also faster and easier to install than an original factory-fitted system.
The Autowatch Ghost, a groundbreaking technology, is a new generation device that prevents contactless car thefts by connecting to a vehicle's CAN network and using the buttons to generate an unique PIN code. It is a devious system that can be installed without removing wires and does not require any additional key fobs. It also connects to the vehicle's original ECU and prevents thieves from gaining access to it using new keys or replacing the ECU with a "relay". This system is TASSA verified and can be connected to an International Security Register, allowing owners to have peace of mind knowing their vehicles are secure from theft.
No RF scanning
If you have invested lots of time and money into the customisation of your vehicle, you'll want to protect it from theft. One of the best ways to do this is by installing an immobiliser. It will stop your engine from starting unless you enter a unique PIN code. You can generate a 20-digit code by pressing the buttons on your dashboard and the steering wheel. This will ensure that only you are allowed to drive your vehicle. It is also possible to set up a service or valet mode that will allow you to start your car temporarily without having to enter the PIN code. This will allow your technician to work on your car without you being present. This is an excellent option for those who want to cut down on time and make their life simpler.
Ghost immobilisers, which are new generation device, connects to the CAN data network of your vehicle and utilizes the buttons on the dashboard as well as the steering wheel to set a PIN number. It is designed to blend into with the vehicle's design, as it doesn't emit any noise or light indicator. It can be installed anywhere on your vehicle, without affecting the aesthetics.
This stealthy system is TASSA approved and can cut down on the cost of insurance. It also comes with the ability to track that can track your vehicle even if it's been stolen. This is great for those who own a unique expensive car that you've put many hours customizing.
The Autowatch Ghost can be used in conjunction with an iPhone application that allows you to start your vehicle remotely in the event you have forgotten your PIN or are unable to get into the vehicle due to some reason. This feature is perfect for those who need to run errands or drop off your kids, but do not want to risk having someone else drive your vehicle. This feature is beneficial if you have to take your car in to be repaired or serviced.
Another benefit of the Ghost is that it doesn't transmit or detect radio frequency signals, which makes it inaccessible to thieves who employ RF scanning or code grabbing technology. It also shields your vehicle from key copying, ECU swapping and other common methods of car theft.
There is no key to cloning
Ghost immobilisers are a great option to protect high-end vehicles and are designed to block key cloning. They prevent your car from starting until an additional PIN code is entered in conjunction with the normal key fob. This makes it very difficult for thieves to steal your vehicle, and may deter them from doing it in the first place. This is a particularly good option if you've invested lots of time and money in customizing your vehicle or have a unique or expensive model.
These immobilisers are linked to the vehicle's CAN data network and are completely hidden, which means their presence isn't obvious. It is also difficult to detect using radio frequency scanning technology or code grabbing. This means that a thief must spend much longer in order to successfully get your car.
To bypass the system, a thief must be aware of the unique pin code and the location of the Ghost. However, the pin code is specific to you and can be changed as often as you want. The pin code you select is simple to remember, but mathematically impossible for anyone else to understand. In addition the engineer will have provided you with an emergency PIN code that can be used to bypass the pin in case you ever forget the pin.
The Ghost CAN Bus immobiliser can be installed in a matter of minutes on your vehicle. It works with all vehicles and immobiliser is completely customizable to match the style of your vehicle. It is also extremely affordable and easy to use. You can even transfer the device to a different vehicle if you switch cars during the lifetime of ownership, provided that the new vehicle is compatible with it.
The CAN bus can be used with other security features. For instance, it can detect damage to your vehicle and notify the owner. It can also stop the engine if the vehicle is damaged. It also helps protect your vehicle from key cloning and hacking. It can also detect any vibrations or contact with the vehicle. It will also notify the owner when the vehicle is moving.
No OBD port hacking
Ghost employs a hidden immobiliser module connected to your vehicle's CAN data network which stops thieves from gaining access to your vehicle to disable the alarm, turn off the key fob, and then code new keys. This technology is an improvement over the old methods used by thieves to steal vehicles in the past. The CAN data network also ensures that the system won't be affected by disconnecting or replacing your battery.
The Autowatch Ghost is the world's first aftermarket CAN bus non-detectable immobiliser that safeguards against hacking, key-cloning and theft of replica cars. It doesn't use LED indicators or key fobs. Instead, it utilizes the buttons on your steering wheel, console and door panels.
Modern thieves use diagnostics to detect circuit cuts on your vehicle and can bypass immobilisers that require a lot of wiring or are built into the wiring. The Ghost is weatherproof and doesn't require any additional wiring. It cannot be identified by diagnostic tools that are professional. It can be installed even on vehicles with anti-theft devices.
A Ghost 2 immobiliser immobiliser comes with a major benefit: your car can only be started by a person who knows your PIN code and has physical access to your vehicle. This is an advantage over traditional security systems which can be bypassed by simple screwdrivers or cable tampering.
If you forget your PIN you can reset it easily using the emergency PIN reset function on a mobile device or computer. This is useful if are looking to start your vehicle after leaving it in a garage, or using a valet parking service.
The autowatch ghost immobiliser Ghost 2 has been approved for insurance by TASSA and can be installed by our authorized installers. It has an RFID fingerprint system that can identify parts that are not in use that allow for the return of stolen items in the event that they are discovered. It can also be switched to'service mode,' which allows the engine to start when your vehicle is parked in a garage or with valet parking, however, you'll need to enter your PIN code again to exit the car.