11 Strategies To Completely Block Your Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to decay or rust as aluminum or timber.

It is essential to clean and oil UPVC windows and doors regularly. This will help prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home, and could even be fatal. It is essential to take the time to ensure that you're doing everything you can to keep your windows in good condition.

For single pane windows, it can be relatively simple to replace them, and the new window will usually fit inside the frame that was previously installed easily. However If windows with double panes are held in place by internal beading, it will be more difficult to remove the panes that are in place and replace them with new ones. In this case you'll need find some plastic spacers that assist the new pane to fit properly into the frame of the window.

If you are going to try to remove the glass panes yourself it is important to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. It is also a good idea to lay down a drop cloth before you begin working on the glass, so that any fragments of glass fall on the fabric rather than on the floor, where they could be trampled upon and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop drafts and water from entering the property until a professional is able to come out and repair the window. It also acts as a barrier that will prevent any intruders from gaining entry into your home. If the distance between the door and the window is large, you might want to use a security screen that also includes an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. However, over time they can suffer from a variety of issues like sliding. A sagging window Repair in uPVC can cause problems with light, draughts, and even security. It's crucial to act immediately if you realize that your uPVC windows are sagging.

To fix a window that is sagging you can try to reposition the hinges. First, you'll need to unblock the windows to reach the frame. Then, remove both the hinges on the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to check the fit after having relocated your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they stay in the right place.

If you are unable to reposition the hinges, you could need to replace the seal. Over time, rubber seals lose their elasticity and become dry which causes them to lose tightness. It is essential to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles may also become loose. This is usually due to screws that have become undone over time, but it can be due to the handle mechanism wearing out. Fortunately, it's easy to fix the loose uPVC window handle yourself. First, you'll need to close the window and perform an initial fitting. The joints at the corners of the sash should align with the joint on the casing. If it doesn't, you can use a screwdriver or a wrench to loosen the handle and reverse the mechanism back into the position it was in.

3. Water Leaks

It is important to take action if get up each morning to discover mouldy walls and wet floors. Windows that leak water do not only lead to the degradation of your home's structure but also hinder your efforts to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix that can be done by any skilled DIYer. Depending on how severe the issue is, old caulking may have to be removed. It is important to remember that when it comes to uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and can reduce your energy efficiency.

Make sure that the drainage holes have no debris inside them and ensure that the sill pan has been properly angled to drain away from the window. In more serious cases you might have to consider replacing the window.

Mold spots and rotted sills are also signs of water leakage. The mold thrives in damp environments and can quickly spread across the home.

If the leakage occurs between the double-glazed window, it is more likely the problem is with the seal rather than the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and blow open in a breeze it could be hinges that are at the fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. It's very simple to replace a hinge on a window but it's much easier if someone helps you to hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the right direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window in a certain way or due to inadequate installation at the factory. Sending us photos via our website will often solve the issue. We are always happy to provide suggestions.

It is also essential to grease the hinges regularly. Applying an engineering lubricant that is light to the hinges is a good way to do this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It can also stop corrosion and reduce the risk of sticking. This should be done at least every year. WD40 and other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different things. The hinges may also become unbalanced due to wear, window repair which can cause a gap where the sash and frame meet. These can be easily repaired by giving them a good clean, but if they are beyond repair it may be necessary to have them realigned or replaced. Second, the interlock can be disaligned. It is located on the hinge's side and might require to be cleaned. In some cases it might be necessary to replace these.

The seals may wear out or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity lenses. This will help regulate indoor temperatures and decrease the possibility of draughts.

Another, and most effective ways to cut down on draughts is by using a draught excluder, these are typically made of fabric which are filled with a type of filler. They can be positioned on the windowsill on top. They can help stop cold air from entering and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security to your home with a little regular maintenance and repairs. It is important to remember that all windows eventually wear out and it could be cheaper to replace them than to repair them. If you encounter any issues with your Upvc window you should consult an expert as soon as possible.