10 Erroneous Answers To Common Repairs To Upvc Windows Questions: Do You Know The Right Ones

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they don't rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, which can make it very dangerous and potentially fatal. It is important to take the time to make sure that you're doing everything you can to keep your windows in good condition.

For single pane windows, it is relatively easy to replace windows, and the new one will generally fit within the old frame very easily. However If windows with double panes are secured by internal beading it will be more difficult to take out the old panes and put in new ones. In this case it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.

If you plan to try to remove the window panes yourself, it is essential to wear appropriate safety gear such as gloves that are thick and eye protection. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards fall on the fabric, not onto the floor which could cause them to be trampled.

It's a great idea cover the gap with tape after the glass has been removed. This will stop drafts and water from getting into your home until a professional arrives to fix the window repair. It also acts as a barrier that will prevent any intruders to gain access to your home. If the gap between the door and the window is substantial, you may prefer an alarm system that has windows. This will give you the best of both.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber sash windows. Over time, they can develop a number of problems that include sagging. A sagging uPVC windows could cause issues with light, draughts, and even security. It's important to take action immediately if you realize that your uPVC windows are falling down.

To fix a window that is sagging you can try to reposition the hinges. To do this, you'll have to open the window to get to the frame. After that, using a screwdriver, you can remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having relocated your hinges. If you're satisfied with the size of the window, tighten the screws to keep them in place.

If you cannot reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity over time, leading them to lose their tightness. If this happens, it's essential to replace the seal as fast as you can to ensure that your uPVC windows are waterproof and safe from drafts.

uPVC handles may also become loose. This is often caused by screws that have become undone over time, but it can also be caused by the handle mechanism wears out. It's relatively simple to fix a loose uPVC hand. The first step is to close the window and perform a test fit. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is essential to take action if you get up each morning to discover mouldy walls and wet floors. Leaks of water from windows can cause structural damage to your home and also affect your ability to regulate the temperature in your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or missing.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on how serious the issue is, the old caulking may have to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs, do not be tempted to 'over-caulk in order to make the area more difficult to clean and can decrease the efficiency of your energy usage.

Verify that the drainage holes have no debris in them, and also that the sill pan is angled correctly to drain away from the window. In more serious cases you might need to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives in damp conditions and can quickly spread across the house.

It is also important to remember that if the leak is coming from between the glass of your double-glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. It is also possible to be fixed by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your upvc window Repair windows are brittle to open, or are loose and open in a breeze it could be the hinges that are at the fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like any mechanical part hinges are prone to wear out over time. It's very simple to change the hinges on a window however it is easier if someone else helps you hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a certain way or due to poor installation at the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be pleased to offer you advice.

It is also crucial to grease the hinges regularly. Applying a light engineering lubricant on the hinges is a good way to do this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It also decreases the risk of a window getting stuck and stop corrosion. This should be done at least every year. WD40 and upvc window Repair other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different things. The hinges may also become misaligned due to wear, which can cause a gap where the sash meets frame. If they are damaged beyond repair, it could be necessary to get them re-aligned. The second is the interlock, which is located on the hinge side of the window, may be misaligned. Again, it is possible to give them a good clean, but in some cases it might be necessary to get them replaced.

The second most frequent cause of draughts is the window seals. They are prone to wear or damaged over time and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping will help to prevent draughts. Replace the windows made of upvc with low-emissivity lenses. This will help control indoor temperatures and lessen draughts.

One of the most effective ways to reduce drafts is to use an draught excluder. These are usually fabric tubes that are filled with some sort of filler and can be put on top of your windowsill. These will keep your home warm by blocking cold air.

Your upvc windows can continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is crucial to recognise that all windows have a lifespan and there may come the point when it's more efficient to replace them than repair them. So, if you are having issues with your upvc windows, it is recommended to seek assistance from a professional as soon as you can.