15 Gifts For The Repairs To Upvc Windows Lover In Your Life

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and may even be fatal. It is essential to ensure that your windows are in good condition.

For single pane windows it is relatively easy to replace them, and the replacement is usually able to fit into the frame that was previously installed easily. However If you have double pane windows that are anchored by internal beading it will be more difficult to remove the old panes and put in new ones. In this instance it is essential to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass by yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall on the fabric and not on the floor, where they could be trampled under.

It's a great idea cover the gap with tape after the glass is removed. This will prevent drafts and water from getting into your property until a professional arrives to fix the window. This will also act as a barrier that will prevent any intruders to gain access to your home. If the gap between the door and the window is large, you might want to use security screens that includes windows. This will give you the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows made of sash. However, over time they may be afflicted by a variety of issues, including sliding. A sagging window in uPVC can cause problems with light, draughts, and even security. It's important to take action when you realize that your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window which is sliding. To accomplish this, you'll need to open the window to access the frame. Then, using the screwdriver, you'll be able to unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after having repositioned your hinges. If you are happy with the fit of the window, tighten the screws to keep them in the right position.

If you are unable to reposition the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry which causes them to loosen. It is crucial to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. The majority of the time it is due to screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. It's fairly simple to fix a loose uPVC handle. First, you'll need to close the window and perform an initial fitting. The corners of the sash need to be aligned with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into the position it was in.

3. Water Leaks

It is crucial to act if you wake up every morning to find mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home and impact your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the problem the old caulking may need to be removed before a fresh layer can be applied. It is essential to keep in mind that when it comes to uPVC window repairs, do not be tempted to apply too much caulk and then make the area more difficult to clean and can reduce your energy efficiency.

Make sure that the drainage holes have no debris in them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more severe situations, you may have to replace the window.

Mold spots and rotted sills are also signs of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the home.

If the leakage is occurring between the double-glazed glass it is more likely that the issue is more with the seal rather than the frame. It is also possible to be corrected by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with ease, it may be hinges that are at the fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that are hinged and like any mechanical part they will wear out over time. It is very easy to change the hinges on a window but it's much easier if someone else helps you to hold the frame.

Make sure that the uPVC hinges are open and closed in the proper direction. This can be done by looking for the arrow on each hinge, this indicates which way the window should be opened.

The issue can be caused either by opening the window improperly or due to a poor installation in the factory. Sending us a picture via our website is often enough to resolve the problem. We are always happy to offer assistance.

It is also crucial to lubricate the hinges on a regular basis. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also lower the risk of a window sticking and prevent corrosion. This is recommended to be done at least every year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a variety of different factors. The hinges, also because of wear and tear, can become misaligned, this will cause a gap to form where the sash joins the frame. If they are beyond repair, it might be required to realign them. Secondly the interlock, this is located on the hinge side of the window, can also be misaligned, and again it may be possible to just give them a thorough clean, however in some cases it might be necessary to have them replaced.

The second most frequent cause of draughts is the window seals. These are prone to wear or damaged over time, window repairs and will allow air to escape through these gaps. Replacing these with high-quality weatherstripping will help to prevent draughts. Another option is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures and again will reduce the risk of draughts.

Lastly, one of the most effective ways to cut down on drafts is to use an draught excluder. These are typically fabric tubes that are filled with some kind of filler. They can be positioned on the windowsill on top. These will help to stop cold air from entering and keep your home warm and cosy!

With a bit of regular maintenance and repairs, your upvc windows will continue to provide an excellent level of insulation and security for your home. However, it is important to realize that all windows have a lifespan and they may reach a point where it is more efficient to replace them than fix them. If you encounter any issues with your Upvc window repair, it's best to consult a professional immediately.