15 Gifts For The Repairs To Upvc Windows Lover In Your Life

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home, and could even be fatal. You should take the time to ensure that your windows are in good working order.

Single-pane windows are relatively easy to replace, and they generally fit into frames that were previously in use very easily. If you have double-paned windows that are joined by internal beading, it is more difficult to remove and replace the old panes. In this case you'll need to source some plastic spacers that will help the new pane to fit perfectly into the frame of the window.

Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass by yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards of glass fall onto the fabric, not onto the floor and could be trampled.

It's a great idea to tape the gap once the glass is removed. This will keep drafts and water from entering your property until a professional comes out to repair the window. It also acts as an obstruction to prevent intruders from getting into your home. If the gap is particularly large, you might think about the security door with an integrated window, since it offers the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows with sash. However, over time, they may be afflicted by a variety of issues, including sagging. A window that is sagging can cause problems with light, draughts, and even security. It's important to take action immediately if you realize that your uPVC windows are sagging.

Repositioning the hinges could help fix a window repairs near me that is sagging. To accomplish this, you'll need to open the window so that you can get to the frame. You can then unscrew both the hinges at the top and window repairs bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you've repositioned your hinges. If you are happy with the fit of the window, you can tighten screws to hold them in the right position.

If you are unable to move the hinges, you could have to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to lose tightness. If this happens, it's essential to replace the seal as soon as you can to ensure that your uPVC windows are waterproof and secure from draughts.

uPVC handles could also become loose. Most often this is due to screws that have come loose over time. However, it could occur because the handle mechanism has worn out. Fortunately, it's easy to repair a loose uPVC window handle yourself. The first step is to close the window and then perform an experiment to ensure that it fits. The corner joints of the sash must align with the casing joint. If it does not, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and damp walls every time it rains it's important to take action. Water leaks through windows can cause structural damage to your home, and hinder your ability to control the temperature in your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is damaged or missing.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Depending on how severe the issue is, the old caulking may have to be removed. It is important to remember that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and could decrease the efficiency of your energy usage.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more extreme situations, you may have to replace the window.

Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to keep in mind that if the leakage originates from the glass of your double-glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open with ease it could be the hinges that are at the fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Like any mechanical part, hinges can wear out over time. It is an easy process, but it's simpler if you have someone to help hold the frame up.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The issue can be caused by opening the window improperly or a faulty installation in the factory. Sending us photos via our website will often resolve the problem. We are more than happy to offer advice.

Regularly lubricating hinges is also essential. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also reduce the chance of windows sticking and prevent corrosion. The ideal time to do this at least once a year. WD40 or other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different things. First, the hinges due to wear and tear could become misaligned. This will cause gaps to develop between the sash and the frame. If they're beyond repair, it may be necessary to have them realigned. Second, the interlock can be misaligned. This happens on the hinge side and may need to be cleaned. In certain instances, it may be necessary to replace them.

These seals can wear down or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help to regulate indoor temperatures, and reduce draughts.

The last way to reduce draughts effectively is by using a Draught-excluder. These are usually fabric tubes filled with a filler which can be hung over your window sill. They will help block out cold air and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security to your home by performing regular maintenance and repairs. It is essential to remember that all windows will eventually wear out and it is more cost-effective to simply replace them rather than repair them. If you are experiencing issues with your window made of upvc you should consult an expert as soon as possible.