Why Everyone Is Talking About Autowatch Ghost Immobiliser Fitting Right Now
Ghost Immobiliser Installation
Install a ghost immobiliser on your car to safeguard it from thieves. Our TASSA verified system protects vehicles against hacking, key cloning and vehicle immobiliser bypass.
The system is hidden within your vehicles wiring loom which makes it completely inaccessible to anyone who is looking. It is operated by generating pin code push sequences by using existing buttons on the steering wheel, door cards and the centre console.
No circuit cuts
A car is a precious item that takes years of hard work to obtain, which is why car owners would want to secure their car from theft. However, traditional security devices like wheel locks and alarms can easily be snatched away or bypassed by thieves. A ghost immobiliser, on the other hand, is a highly effective solution that is silent and isn't easily identified by modern thieves.
A ghost immobiliser is a hidden device that connects to the CAN data network in your vehicle to shut down the engine without the use of radio frequencies or key fobs. It communicates with the vehicle's ECU by using buttons on the steering wheel, dash, and door panels, to create a unique pin code that you only can access. The code can be changed at any time and can contain up to 20 digits depending on your preferences. It comes with an emergency code that you could use in the event that you forget your PIN.
The ghost 2 immobiliser fitting near me immobiliser is beneficial to stop the relay box inside your home from transmitting the signal of your car key, which would unlock the doors and start your vehicle. It could even block techniques of stealing your vehicle, such as OBD port hacking. The device is small and weatherproof, so it's difficult to detect and is even more difficult to interfere with.
Another benefit of the ghost immobiliser is that it can be fitted to your vehicle without permanent marks. It's ideal for those who plan to sell their vehicle in the near future. It's also a lot faster and easier to install than an original factory-fitted system.
The autowatch Ghost immobiliser fitting Ghost is a groundbreaking next-generation device that can stop theft of cars using contactless technology by connecting to the vehicle's CAN data network and using existing buttons to create a unique PIN code. It is a devious system that can be installed without severing any wires and does not require any additional key fobs. It is also connected to the vehicle's original ECU, preventing thieves from gaining access by using new keys or replacing the ECU with an "relay". This system is TASSA verified and can be connected to an International Security Register, allowing owners to have peace of mind knowing that their vehicles are protected against theft.
No scanning with RF
You'll want to safeguard your vehicle from theft if you have spent a lot of money and spent a lot of time customizing it. Installing an immobiliser is one of the most effective ways to avoid theft. It will stop your vehicle from starting until you input a unique code. You can create a 20-digit PIN using the buttons on your dashboard and steering wheel. This will ensure that only you are able to drive your vehicle. You can also set up a valet or service mode that will allow you temporarily to start your vehicle without entering the PIN code. This will allow the technician to work on your vehicle, without being present. This feature is ideal for those who wish to cut down on time and make their lives easier.
A ghost immobiliser, a new generation device, connects to the CAN data network of your vehicle and utilizes the buttons located on the dashboard and the steering wheel to set a PIN number. It is designed to be discrete without any light or sound to signal it and can be placed anywhere on the vehicle without impacting the look of your beloved vehicle.
This stealthy device is TASSA approved and can reduce the cost of insurance. It also has a tracking function that can track your vehicle even if it's been stolen. This is great for those who own a unique expensive car that you've spent a lot of effort customizing.
Autowatch Ghost, in conjunction with the iPhone app allows you to remotely start your vehicle if you have forgotten your PIN or are unable get into your vehicle. This feature is perfect if you have to run errands or pick up your kids but don't want to risk having someone else drive your car. It can also be helpful when you have to take your vehicle to a mechanic for maintenance or repair.
The Ghost is unique in that it does not transmit or detect radio frequencies and is therefore undetectable by thieves who use RF scanning and code grabbing technologies. It also has the ability to protect your car against key cloning and ECU swapping which are the most common methods of car theft.
No key to cloning
Ghost immobilisers can be an excellent method to protect high-end cars and prevent key copying. They prevent your car from starting unless an additional PIN code is entered alongside the normal key fob. This makes it difficult for thieves to steal the vehicle, and may even deter them from attempting. This is a good idea in the event that your vehicle has been heavily customized or if it is a rare model.
The immobilisers are connected to the vehicle's onboard CAN data network and are completely hidden meaning there is no indication of its presence in the vehicle. It is also difficult to spot using radio frequency scanning technology or code grabbing. This means that a thief must spend a lot more time in order to steal your vehicle.
To get around the system, thieves need to be aware of the pin code and the location of the Ghost. The pin code is unique to you and autowatch Ghost immobiliser fitting you can change it as often as needed. The pin you select is easy to remember but mathematically difficult for anyone else to figure out. The engineer will also provide an emergency pin code in case you forget the pin.
The Ghost CAN Bus immobiliser can be easily mounted anywhere on your vehicle. It can be used with any vehicle and can be completely customized to match your car's style. It is also easy to use and is affordable. You can even transfer the device to a different vehicle if you change vehicles during the course of ownership, provided that the new vehicle is compatible with the.
The immobiliser for the CAN bus is compatible with a number of other security features. It is able to, for instance, detect damage to the vehicle and notify the owner. It can also stop the engine in the event that the vehicle is damaged. The system also protects your vehicle from hacking and key cloning. It also detects vibrations and contact with the vehicle. In addition, it can warn the owner if the vehicle has been moved.
No OBD port hacking
Ghost employs a hidden immobiliser module connected to the CAN data network of your vehicle that prevents thieves from gaining access to your vehicle to disable the alarm, or deactivate the key fob and generate new keys. This technology is a significant improvement over the traditional methods employed by thieves in the past to steal your vehicle. The CAN data network means that the system will not be affected by disconnecting or changing your battery.
The Autowatch Ghost, the first non-detectable immobiliser for CAN bus in the world, protects against key-cloning, hacking and replica car theft. It doesn't use LED indicators or key-fobs. Instead, it utilizes the buttons on your steering wheel, console and door panels.
Modern thieves are able to employ diagnostics to find circuit breaks in your vehicle. They can bypass immobilisers that require a lot of wiring or are integrated into the wiring. The Ghost is weatherproof, doesn't require additional wiring, and can't be detected by diagnostic tools of a professional. It can even be installed on vehicles that are fitted with anti-theft equipment.
Another advantage of the Ghost immobiliser is that your vehicle can only be started by a person who knows the PIN code and has physical access to your car. This is a significant advantage over traditional security systems that can be tampered with by simple modification of cables or a screwdriver.
If you forget your PIN, you can reset it easily by using the emergency PIN override function on a mobile phone or computer. This is useful if want to start your vehicle after having left it in a garage, or with a valet parking service.
The autowatch ghost immobiliser Ghost 2 has been approved for insurance by TASSA and can be installed by our authorized installers. It features an RFID fingerprint system that allows individual parts to be identified, which will enable the return of stolen parts should they be found, and it can be switched into 'service mode', which will allow the engine to start when the vehicle is in a garage or using a valet parking service, but you must enter your PIN number to exit the vehicle again.
