17 Reasons Why You Shouldn t Beware Of Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They don't decay or rust as aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will help prevent unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home, and could even be fatal. It is crucial to take the time to make sure that you are doing everything you can to keep your windows in good condition.

For single pane windows it is fairly easy to replace windows, and the new one will usually fit inside the frame of the previous one easily. If you have double-paned windows which are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this instance you'll need to locate some plastic spacers that will help the new pane to fit perfectly into the window frame.

Wearing protective eyewear and thick gloves is essential for anyone who plans to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not onto the floor and could be trampled.

Once the glass is removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to stop water and drafts from getting into the home until a professional is able to come out and repair the window. This will also provide a barrier to prevent any intruders from making their way into your home. If the gap is large, you might be interested in an alarm door that comes with an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash window. However, over time, they may be afflicted by a variety of issues like sagging. A sagging uPVC window can cause issues with light, draughts, and even security. It is crucial to act when you notice your uPVC windows are sagging.

To repair a window that is sagging, you can try to reposition the hinges. To accomplish this, you'll need open the window to get to the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you have relocated your hinges. If you are happy with the fit of the window, tighten the screws to keep them in the right position.

If you are unable to reposition the hinges, upvc Repair you could need to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause their tightness to decrease. If this happens, it's essential to replace the seal as soon as possible so that your uPVC windows are watertight and draught-proof.

uPVC handles can also loosen up. This is typically caused by screws that have become undone over time, but it could also be caused by the handle mechanism wears out. It's relatively simple to fix a loose uPVC hand. You'll first need to close the window and do a test fitting. The corner joints of the sash need to align with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle and turn the mechanism back into its original position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it is important that you take action. Windows that leak water do not only lead to the degrading of the structure of your home but also hinder your efforts to control the temperature in your home. The most common cause for leaking uPVC windows is that the sealant around the frame is either damaged or is missing.

This is a simple fix that can be completed by any DIYer who is competent. Depending on how severe the issue is, the old caulking may have to be removed. When it comes to uPVC repair, you must avoid 'over-caulking'. This will make your window harder to clean and reduce its energy efficiency.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious situations, you might need to consider replacing the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This mold thrives in damp environments and is able to quickly spread throughout the house.

It is also important to keep in mind that if the leak originates from the glass of your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and blow open in a breeze it could be hinges that are at the fault. Any competent DIYer can replace these in a matter of minutes.

Like all mechanical parts hinges are prone to be damaged over time. It's very simple to replace a hinge on a window but it's much easier if someone else helps you hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain manner or because of improper installation in the factory. Sending us a picture via our website will often solve the issue. We are more than happy to give suggestions.

It is also important to grease the hinges regularly. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different things. The hinges may also become misaligned due to wear, which can cause a gap where the sash and frame meet. If they are beyond repair, it could be necessary to get them re-aligned. The interlock, which is on the hinge side of the window and can also be misaligned, and again it is possible to give them a thorough clean, however in some instances it could be necessary to have them replaced.

The next most common cause of draughts is the window seals, these are prone to wear or damaged over time and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help regulate indoor temperatures and decrease the possibility of draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler that can be put on top of your window sill. These will help to keep cold air out and keep your home warm and cozy!

The windows made of upvc repairs near me can continue to provide excellent insulation and security in your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually become worn out, and it is more cost-effective to simply replace them than to repair them. If you have any problems with your Upvc window it is recommended to speak with an expert immediately.