Watch This: How Repairs To Upvc Windows Is Gaining Ground And What To Do

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they don't corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce costly repairs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home and even be fatal. It is essential to take the time to make sure that you are doing everything you can to ensure that your windows are in good repair.

For single pane windows it can be relatively simple to replace windows, and the new one will generally fit within the frame of the previous one easily. If windows with double panes are held together by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this case, it is necessary to purchase plastic spacers in order to help the new pane fit into the window frame.

If you plan to try to remove the window panes by yourself it is crucial to wear the appropriate safety equipment, including thick gloves and eye protection. It is also a good idea to lay down a drop cloth before you begin working on the glass, so that any shards fall onto the cloth instead of onto the floor, where they could be trampled on and cause further damage.

It's a great idea cover the gap with tape after the glass has been removed. This will keep drafts and water from entering your property until a professional is able to repair the window. This will also provide an obstruction to prevent intruders from making their way into your home. If the gap is particularly large, you may think about an alarm door that comes with an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. As time passes, they may be affected by a variety of issues, including sagging. A sagging window in uPVC can cause problems with light, draughts, and even security. It is crucial to act when you realize that your uPVC windows are sliding.

To fix a sagging window you can try repositioning the hinges. To accomplish this, upvc window repairs you'll need to open the window to access the frame. Then, remove both the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close your window and test it for an appropriate fit. If you're satisfied with the fit of the window, you can tighten screws to secure them in the right position.

If you are unable to move the hinges, you could have to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to lose their tightness. It is essential to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also become loose. This is typically caused by screws that have loosened over time, but it can be caused by the handle mechanism wears out. It's fairly simple to fix a loose uPVC handle. You'll first need to close the window and do an initial fitting. The corner joints of the sash need to be aligned with the casing joint. If it does not you can use a screwdriver to loosen up the handle. Then turn the mechanism into position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains, it's crucial to take action. Water leaks from windows are not just a cause for degradation of your home's structure but also hinder your efforts to control the temperature within your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or is missing.

This is a fairly simple fix that can be completed by any competent DIYer. Depending on the severity of the problem the old caulking might need to be removed before a new layer can be put on. It is important to remember that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk and then make the area harder to clean and can decrease the efficiency of your energy usage.

It is important to check that the drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious instances, you might need to consider replacing the window.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to remember that if the leakage is coming from between the glass of your double glazing glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sagging. Again this can easily be fixed by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or it opens in an ease. Any competent DIYer can replace these in a matter of minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that use hinges and like any mechanical part they will wear out over time. Changing a window hinge is an easy process but it can be easier with someone else to help you hold the frame in place.

It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The problem can be caused due to opening the window in the wrong way or due to a poor installation at the factory. This issue can be fixed by sending us a photo through our website and we will be more than happy to give you advice.

It is also crucial to grease the hinges regularly. Applying a light engineering lubricant on the hinges is an ideal way to do this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It can also lower the chance of windows getting stuck and stop corrosion. This must be done at a minimum every year. WD40 or other solvent-based oils should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a few different factors. The hinges may also become misaligned due to wear, which can cause gaps between the frame and sash. If they are damaged beyond repair, it might be necessary to get them re-aligned. In addition, the interlock could be misaligned. It is located on the hinge's side, and might require to be cleaned. In certain instances it is possible to replace the hinges.

The second most frequent reason for draughts is window seals. They can become worn down or damaged over time, and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help regulate indoor temperatures and lessen draughts.

The last way to reduce the amount of draughts is to use a draught-excluder. These are typically fabric tubes filled with a filler, which can be hung over your window doctor near me sill. These will keep your home warm by blocking cold air.

Your windows made of upvc will remain a great source of insulation and security in your home with a little regular maintenance and repairs. It is crucial to recognise that all windows have a life span and there may come the point when it's more cost-effective to replace them rather than repair them. If you have any problems with your window made of upvc, it's best to consult a professional immediately.